Publications

• Poster de conférence

Optimization of PZT ceramic based composites IDT sensors for health monitoring of structures

Rafatou Takpara, Marc Duquennoy, Christian Courtois, Mohamed Rguiti, Yannick Lorgouilloux

Electroceramics XV, Jun 2016, Limoges, France. ⟨hal-03591395⟩

• Rapport

Adaptation de la méthode et du banc de mesure pour la caractérisation du mouillage

Christophe Virgilio, Julien Carlier, Malika Toubal, Vincent Thomy, Pierre Campistron, Bertrand Nongaillard, Lucile Broussous, Philippe Garnier

[Contrat] UPHF. 2016. ⟨hal-03591376⟩

• Communication dans un congrès

A Lagrangean Relaxation for Cross-dock Door Assignment Problem

Placide Nduwayo, Said Hanafi, Christophe Wilbaut

Journées Polyèdres et Optimisation Combinatoire, Jun 2016, Metz, France. ⟨hal-03537808⟩

• Communication dans un congrès

Multi-level cooperation between the driver and an automated driving system during lane change maneuver

Mohamed Amir Benloucif, Jean-Christophe Popieul, Chouki Sentouh

This article presents an automated driving system that ensures cooperation with the driver. The system architecture is structured in hierarchical levels to allow suitable interaction with the driver on multiple driving levels. A multi-level cooperative interaction concept is developed to…

2016 IEEE Intelligent Vehicles Symposium (IV), Jun 2016, Gotenburg, Sweden. pp.1224-1229, ⟨10.1109/IVS.2016.7535546⟩. ⟨hal-03406852⟩

• Communication dans un congrès

Aerodynamic characterization of a vertical axis wind turbine using a mechatronical experimental setup

Jean-Luc Menet, Samuel Dupont

This paper describes an innovative low-cost wind turbine evaluation platform. A rapid prototyping process was used to fabricate the small form wind turbine airfoil, a DC motor was used as a generator to evaluate the generated power and torque. The experimental setup took place in an academic wind…

2016 11th France-Japan & 9th Europe-Asia Congress on Mechatronics (MECATRONICS) /17th Internationall Conference on Research and Education in Mechatronics (REM), Jun 2016, Compiègne, France. pp.225-229, ⟨10.1109/MECATRONICS.2016.7547146⟩. ⟨hal-03549319⟩

• Thèse

Caractérisation expérimentale et numérique aux différentes échelles de la tenue mécanique au choc d'assemblages soudés MAG, Mechanical strength of MAG welded joints : a multi-scales numerical and experimental study

Julien Carrier

Ces travaux portent sur l'étude expérimentale et numérique de la rupture de structures soudées soumises à des sollicitations pyrotechniques telles que celles subies par les véhicules militaires sur le champ de bataille. Ce travail de thèse présente le développement de modèles éléments finis…, Finite element modeling is commonly used to design armored vehicles and to evaluate the strength of the structure against mine explosion. This study investigates experimental and numerical failure of welded structures submitted to such dynamic loadings. The goal is to develop detailed finite…

Mécanique [physics.med-ph]. Université de Valenciennes et du Hainaut-Cambrésis, 2016. Français. ⟨NNT : 2016VALE0016⟩. ⟨tel-03358438⟩

• Communication dans un congrès

Monitoring system for shock absorbers: Application to lightweight aircrafts

Frederic Ameye, Anthony Gobinet, Maxime Lallement, Christophe Delebarre

During flight, the aircraft mass repartition has a deep impact on its stability together with the landing phase. As far as landing is one of the most critical phase of a flight, before taking off, pilots have to take care of the aircraft's center of gravity, by estimating masses and their…

2016 11th France-Japan & 9th Europe-Asia Congress on Mechatronics (MECATRONICS) /17th Internationall Conference on Research and Education in Mechatronics (REM), Jun 2016, Compiègne, France. pp.092-096, ⟨10.1109/MECATRONICS.2016.7547122⟩. ⟨hal-03586184⟩

• Communication dans un congrès

Structures de données persistantes pour le backtracking et le parallélisme en PPC., Persistent data structures for backtracking and parallelism in constraint programming

Julien Vion

Nous présentons les structures de données utilisées par le solveur Concrete pour représenter l’état d’un problème au cours de la recherche. L’utilisation de structures purement fonctionnelles permet de réaliser très facilement un backtracking non chronologique ou une résolution en parallèle., We present the data structures used by the Concrete constraint solver to represent the state of a problem during search. The use of purely functional data structures enable us to implement non-chronological backtracking and parallel resolution easily.

Actes des douzièmes journées francophones de la programmation par contraintes (JFPC 2016), Jun 2016, Montpellier, France. ⟨hal-03388243⟩

• Poster de conférence

Synthesis of pedot electrodes using vapor phase polymerization for ionic EAP-s

Kätlin Rohtlaid, Frederic Vidal, Cedric Plesse, Giao T.M. Nguyen, Eric Cattan, Caroline Soyer

6th International Conference on Electromechanically Active Polymer Transducers & Artificial Muscles, EuroEAP 2016, Jun 2016, Helsingor, Denmark. ⟨hal-03571835⟩

• Poster de conférence

Multi-scale modeling EAP actuators using bond graph

Tan Ngoc Nguyen, Mohamed Bentefrit, Cedric Plesse, Frederic Vidal, Caroline Soyer, Eric Cattan, John D.W. Madden, Sébastien Grondel

6th International Conference on Electromechanically Active Polymer Transducers & Artificial Muscles, EuroEAP 2016, Jun 2016, Helsingor, Denmark. ⟨hal-03566340⟩