Celine
MORIN

Delcourt F., Izerroukyene A., Meresse D., Uystepruyst D., Beaubert F., Morin C. (2024). Experimental Study of Pollutant Emissions from Biomass Combustion and Modeling of PM Transportation. ENERGIES, 17-11, pp. 2586 [DOI=https://doi.org/10.3390/en17112586].

Mameri F., Delacourt é., Morin C., Schiffler J. (2022). 0D Dynamic Modeling and Experimental Characterization of a Biomass Boiler with Mass and Energy Balance. Entropy, 24, pp. 202. [IF=2.524] [DOI=https://doi.org/10.3390/e24020202].

Renaux M., Meresse D., Pelle J., Thuault A., Morin C., Nivot C., Courtois C. (2021). Mechanical modelling of microwave sintering and experimental validation on an alumina powder. Journal of the European Ceramic Society, 41, Issue 13,, pp. 6617-6625, ISSN 0955-2219. [IF=5.302] [DOI=https://doi.org/10.1016/j.jeurceramsoc.2021.06.013].

Wang Q., Consalvi J.-L., Morin C., Legros G., Liu F., Weiwei C., Liu H. (2020). Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames II: soot radiation and flame transition analysis. Journal of Quantitative Spectroscopy and Radiative Transfer [DOI=https://doi.org/10.1016/j.jqsrt.2020.107261].

Carrivain O., Orain M., Dorval N., Morin C., Legros G. (2020). Modeling of Carbon Monoxide Two-Photon Laser-Induced Fluorescence (LIF) Spectra at High Temperature and Pressure. Applied Spectroscopy [DOI=https://doi.org/10.1177/0003702819881215].

Atta P., Diango A., N'guessan Y., Descombes G., Morin C., Jaecker voirol A. (2020). Life cycle assessment, technical and economical analyses of jatropha biodiesel for electricity generation in remote areas of côte d'Ivoire. Refining Biomass Residues for Sustainable Energy and Bioproducts, pp. 523-542 [DOI=https://doi.org/10.1016/B978-0-12-818996-2.00024-7].

Bejaoui S., Creyx M., Delacourt é., Morin C., Therssen E. (2020). Particulate emissions measurements by laser-based techniques in a boiler fueled by wood pellets. Applied Physics B, 126, pp. 6 [DOI=https://doi.org/10.1007/s00340-019-7350-5].

Wang Q., Legros G., Morin C., Yao M., Cai W., Jiang L. (2019). Optical measurements of temperature fields in sooting flames: influence of soot self-absorption. Applied Physics B, 125, pp. 63 [DOI=https://doi.org/10.1007/s00340-019-7179-y].

Wang Q., Legros G., Bonnety J., Morin C., Matynia A., Consalvi J.-L., Liu F. (2017). Experimental assessment of the sudden-reversal of the oxygen dilution effect on soot production in coflow ethylene flames. Combustion and Flame, 183, pp. 242-252, ISSN 0010-2180 [DOI=https://doi.org/10.1016/j.combustflame.2017.05.001].

Carrivain O., Orain M., Dorval N., Morin C., Legrand J. (2017). Experimental Spectroscopic Studies of Carbon Monoxide (CO) Fluorescence at High Temperatures and Pressures. Applied Spectroscopy, ISSN 0003-7028 [DOI=doi: 10.1177/0003702817709439].

Cagin S., Bourabaa N., Delacourt é., Morin C., Fischer X., Coutellier D., Carré B., Loumé S. (2017). Scavenging process analysis in a 2-stroke engine by CFD approach for a parametric 0D model development. Journal of Applied Fluid Mechanics, 9, pp. 69-80

Wang Q., Tran K., Morin C., Legros G., Guibert P. (2017). Predicting fluorescence quantum yield for anisole at elevated temperatures and pressures. pplied Physics B, 7, ISSN 1432-0649 [DOI=10.1007/s00340-017-6773-0].

Cagin S., Fischer X., Delacourt é., Bourabaa N., Morin C., Coutellier D., Carré B., Loumé S. (2017). β-NTF reduction and fast kriging simulation of optimal engine configurations. Mechanics & Industry, 18 [DOI=https://doi.org/10.1051/meca/2017029].

Cagin S., Fischer X., Delacourt é., Bourabaa N., Morin C., Coutellier D., Carré B., Loumé S. (2016). Simulation. A new reduced model of scavenging to optimize cylinder design, 92, pp. 507-520 [DOI=http://dx.doi.org/10.1177/0037549716644516].

Creyx M., Delacourt é., Morin C., Desmet B. (2016). Dynamic modelling of the expansion cylinder of an open Joule cycle Ericsson engine: A bond graph approach. Energy, 102, pp. 31-43, ISSN 0360-5442 [DOI=http://dx.doi.org/10.1016/j.energy.2016.01.106].

Creyx M., Delacourt é., Morin C., Lalot S., Desmet B. (2016). Energetic and Exergetic Analysis of a Heat Exchanger Integrated in a Solid Biomass-Fuelled Micro-CHP System with an Ericsson Engine. Entropy, 18 [DOI=10.3390/e18040154].

Cagin S., Fischer X., Delacourt é., Bourabaa N., Morin C., Coutellier D. (2016). Specialized Reduced Models of Dynamic Flows in 2-Stroke Engines. World Academy of Science, Engineering and Technology, International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, 9, pp. 1634-1643

Hachem H., Creyx M., Gheith R., Delacourt é., Morin C., Aloui F., Ben nasrallah S. (2015). Comparison Based on Exergetic Analyses of Two Hot Air Engines: A Gamma Type Stirling Engine and an Open Joule Cycle Ericsson Engine. Entropy, 17, pp. 7331-7348, ISSN 1099-4300. [IF=2.494] [DOI=10.3390/e17117331].

Tran K., Guibert P., Morin C., Bonnety J., Pounkin S., Legros G. (2015). Temperature measurements in a rapid compression machine using anisole planar laser-induced fluorescence. Combustion and Flame, ISSN 0010-2180 [DOI=http://dx.doi.org/10.1016/j.combustflame.2015.07.033].

Legros G., Wang Q., Bonnety J., Kashif M., Morin C., Consalvi J.-L., Liu F. (2015). Simultaneous soot temperature and volume fraction measurements in axis-symmetric flames by a two-dimensional modulated absorption/emission technique. Combustion and Flame, 162, pp. 2705-2719. [IF=3.708] [DOI=http://dx.doi.org/10.1016/j.combustflame].

Tran K., Morin C., Kühni M., Guibert P. (2014). Fluorescence spectroscopy of anisole at elevated temperatures and pressures. Applied Physics B, 115, pp. 461-470, ISSN 0946-2171. [IF=2.189]

Creyx M., Delacourt é., Lippert M., Morin C., Desmet B. (2014). Modélisation des performances d'un moteur Ericsson à cycle de joule ouvert. Revue Termotehnica, 1, pp. 64-70, ISSN 1222-4057

Creyx M., Delacourt é., Morin C., Desmet B., Peultier P. (2013). Energetic optimization of the performances of a hot air engine for micro-CHP systems working with a Joule or an Ericsson cycle. Energy, 49, pp. 229-239, ISSN 0360-5442. [IF=3.651]

Kashif M., Bonnety J., Guibert P., Morin C., Legros G. (2012). Soot volume fraction fields in unsteady axis-symmetric flames by continuous laser extinction technique. Optics Express, 20, pp. 28742-28751. [IF=3.587]

Saharin S., Lefort B., Morin C., Chauveau C., Le moyne L., Kafaky R. (2012). Vaporization characteristics of ethanol and 1-propanol droplets at high temperatures. Atomization and Sprays, 22, pp. 207-226, ISSN 1044-5110. [IF=0.644]

Bitar Z., Uystepruyst D., Beaubert F., Meresse D., Morin C. (2023). Evaluation of the PANS method for the prediction of the fluid flow in a cyclone separator. Comptes Rendus. Mécanique, 351, pp. 201-218 [DOI=10.5802/crmeca.186].

Blanc M., Delcourt F., Delacourt é., Morin C., Chalet D. (2020). Etude expérimentale des échanges de chaleur pariétaux dans un refroidisseur d'air suralimenté d'un moteur à combustion interne. Entropie, 1(3), ISSN 2634-1476 [DOI=https://doi.org/10.21494/ISTE.OP.2020.0576].

Mameri F., Delacourt é., Lippert M., Morin C. (2016). Modélisation 0D et caractérisation expérimentale d'une chaudière biomasse. Revista Termotehnica, ISSN ISSN 2247-1871

Mameri F., Al-Muhammad J., Delacourt é., Morin C. (2023). Experimental and multiscale numerical study of air-flue gas heat exchanger in a biomass boiler. Hankbook of Thermal Management Systems, Chapter 38, pp. 801-821 [DOI=https://doi.org/10.1016/B978-0-443-19017-9.00034-9].

Leguay S., Morin C., Toro escobar J., Jamshaid M., Raja D. (2022). Analysing and Modeling of Carbon Footprint and Life Cycle Assessment for a Climatic Wind Tunnel. Energy and Exergy for Sustainable and Clean Environment, 1, pp. 633-646 [DOI=https://doi.org/10.1007/978-981-16-8278-0_41].

Delcourt F., Izerroukyene A., Delacourt é., Coppalle A., Morin C., Therssen E. (2023). Experimental study of gaseous polluant and PM emissions from wood pellets combustion in a domestic boiler. , Rouen, avril .

Morin C., Delprat S., Delebarre C. (2020). Transportation and Energy: theoretical and applied teaching at INSA Hauts-De-France with scientific projects. 18th international Conference on the History of Transport, traffic and mobility, Shanghai (China) online conference, octobre .

Mameri F., Delacourt é., Morin C. (2019). Multi-physics and multi-scale characterization of a biomass micro-CHP unit. 23rd edition of IManEE, Pitesti, Romania, mai .

Mameri F., Delacourt é., Schiffler J., Morin C. (2018). Thermal and CFD characterization of an air-flue gases heat exchanger in a biomass micro-CHP system. COFRET'18, Strasbourg France, juin .

Atta P., N'guessan Y., Diango A., Morin C., Jaecker voirol A., Descombes G. (2017). Influence of Jatropha Biodiesel Combustion on Greenhouse Gas Emissions from Life Cycle Assessment. 4th International Conference on Green Energy and Environmental Engineering (GEEE), Sousse (Tunisia), avril .

Atta P., N'guessan Y., Morin C., Voirol A., Descombes G. (2017). AIP Conference Proceedings. Calculation of greenhouse gas emissions of jatropha oil and jatropha biodiesel as alternative fuels for electricity production in Côte d'Ivoire, 1814, février . [DOI=http://dx.doi.org/10.1063/1.4976287].

Wang Q., Legros G., Bonnety J., Morin C. (2017). Experimental characterization of the different nitrogen dilution effects on soot formation in ethylene diffusion flames. Proceedings of the Combustion Institute, 36, pp. 3227-3235, janvier ., ISBN 1540-7489 [DOI=https://doi.org/10.1016/j.proci.2016.07.063].

Atta P., N'guessan Y., Morin C., Jaecker voirol A., Descombes G. (2016). Calculation of greenhouse gas emissions of jatropha oil and jatropha biodiesel as alternative fuels for electricity production in Côte d'Ivoire. TMREES Conferences Series, Paris, novembre .

Wang Q., Legros G., Bonnety J., Morin C. (2016). Experimental characterization of the different nitrogen dilution effects on soot formation in ethylene diffusion flame. 36th International Symposium on Combustion, Seoul (South Korea), juillet .

Cagin S., Bourabaa N., Delacourt é., Morin C., Fischer X., Coutellier D. (2016). Scavenging Process Analysis in a 2-Stroke Engine by CFD Approach for a Parametric 0D Model Development.. Seventh International Exergy, Energy and Environment Symposium (IEEES7), Valenciennes (France), avril .

Carrivain O., Orain M., Dorval N., Morin C., Legros G. (2015). Spectroscopic studies of carbon monoxide: application for detection in flames. 7th European Combustion Meeting, Budapest (Hungary), avril .

Creyx M., Delacourt é., Morin C., Lalot S., Desmet B. (2015). Energetic and exergetic analysis of a heat exchanger integrated in a solid biomass-fuelled micro-CHP system with an Ericsson Engine. Seventh International Exergy, Energy and Environment Symposium (IEEES7), Valenciennes (France), avril .

Cagin S., Fischer X., Bourabaa N., Delacourt é., Morin C., Coutellier D. (2014). A Methodology for a New Qualified Numerical Model of a 2-Stroke Diesel Engine Design. The International Conference On Advances in Civil, Structural and Mechanical Engineering - CSME 201, HOng-Kong, août .

Bonnet D., Guibert P., Tran K., Bonnety J., Luc J., Bouvet J., Hervé P., Morin C. (2014). Anisole fluorescence spectroscopy for gas thermometry measurement. 16th International Symposium on Flow Visualization, Okinawa (Japan), juin .

Bejaoui S., Creyx M., Delacourt é., Therssen E., Morin C., Desmet B. (2014). Characterization of particle emissions and temperature profiles in a domestic wood pellet-fuelled boiler: influence on the radiative heat flux at the combustion chamber wall. Proceedings of the Joint meeting of the French and Italian sections of the IFRF and the Combustion Institute, Pisa (Italy), janvier ., ISBN 978-88-88104-16-4

Creyx M., Delacourt é., Morin C., Desmet B., Peultier P. (2013). Modeling of the heat transfers in a flue gas-air heat exchanger implanted in a solid biomass fuelled micro-combined heat and electrical power system. Eurotherm Seminar on Convective Heat Transfer Enhancement, Brussels, septembre ., ISBN 978-2-87516-059-1

Bejaoui S., Therssen E., Cazier F., Dewaele D., Genevray P., Delbende A., Delacourt é., Morin C., Creyx M., Peultier P. (2013). Study of polycyclic aromatic hydrocarbons, carbon monoxide, nitrogen monoxide and soot emissions from biomass combustion in a wood-fired boiler under varying boiler conditions. The Eighth Mediterranean Combustion Symposium, Izmir, septembre .

Giraldo N., Harmand S., Morin C., Huertas J. (2013). Experimental study of evaporating sessile liquid droplets on a heated horizontal surface. ILAAS-Europe 2013, 25th European Conference on Liquid Atomization and Spray Systems (ILASS-Europe Conference), Chania (Greece), septembre .

Creyx M., Delacourt é., Morin C., Desmet B., Peultier P. (2012). Development of a solid biomass-fuelled boiler for cogeneration. International Symposium of Combustion, Warsaw (Poland), juillet .

Mameri F., Schiffler J., Delacourt é., Morin C. (2021). Etude expérimentale et modélisation dynamique 0D d'un échangeur air-gaz brûlés pour une unité de micro-cogénération biomasse. Congrès Français de Thermique 2021, Belfort, juin .

Renaux M., Meresse D., Pelle J., Morin C., Courtois C., Nivot C., Thuault A. (2020). Etude expérimentale et modélisation thermomécanique du frittage de l'alumine. Congrès Français de Thermique 2020, Belfort, France, juin .

Renaux M., Pelle J., Meresse D., Nivot C., Thuault A., Courtois C., Morin C. (2018). Modélisation et réalisation du frittage de l'alumine par traitement micro-ondes. Matériaux 2018, Strasbourg, France, novembre .

Mameri F., Delacourt é., Lippert M., Morin C. (2016). Modélisation 0D et caractérisation expérimentale d'une chaudière biomasse. COFRET'16, Bucarest (Romania), juin .

Cagin S., Bourabaa N., Fischer X., Delacourt é., Morin C., Coutellier D. (2015). Etude numérique et expérimentale d'un modèle de balayage dans un moteur 2-temps à allumage spontané. 14ème Colloque National Produits, Procédés, Systèmes, intelligents et durables, La Plagne, mars .

Carrivain O., Orain M., Dorval N., Morin C., Legros G. (2014). Détection du monoxyde de carbone par fluorescence induite par laser dans une flamme : comparaison expérience/simulation. 14ème Congrès Francophone de Techniques Laser (CFTL 2014), Marseille, septembre .

Creyx M., Desmet B., Delacourt é., Morin C. (2014). Modélisation des transferts thermiques au travers d'un tube aileté placé dans une chambre de combustion de chaudière biomasse. Congrès Français de Thermique, Lyon, juin .

Creyx M., Delacourt é., Lippert M., Morin C., Desmet B. (2014). Modélisation des performances d'un moteur Ericsson à cycle de Joule ouvert. COFRET'14, Paris, avril .

Zhu X., Morin C., Therssen E., Delacourt é., Delcourt F., Yong Y. (2020). Experimental study of the influence of secondary air on the formation of pollutants and soot from wood pellets combustion. Low-Carbon Combustion, lille, mai .

Offroy J.-B., Bourabaa N., Beaubert F., Delacourt é., Morin C., Therssen E. (2018). Combustion characterization in a biomass boiler with PAHs oxidation. 25th « Journées d'étude » Belgian Section of the Combustion Institute, Mons, Belgique, mai .

Delacourt é., Morin C., Therssen E., Cazier F. (2014). SYLWATT: Etude d'une unité de micro-cogénération biomasse avec moteur Ericsson. rapport final de recherche ARCIR Région Nord Pas de Calais, janvier .