Marc
LIPPERT

Ammam T., Keirsbulck L., Basley J., Grappein E., Delprat S., Benazzouz T., Cornu D., Lippert M., Boussemart D. (2024). Wall pressure control of a 3D cavity with lateral apertures and wall proximity. Experiments in Fluids [DOI=https://doi.org/10.1007/s00348-024-03900-2].

Ems M., Meresse D., Basley J., Lippert M., Boussemart D., Keirsbulck L., Dubar L., Pajot K. (2024). Quantification of braking particles emission by PIV analysis — Application on railway. Atmospheric Environment: X, pp. 100306 [DOI=https://doi.org/10.1016/j.aeaoa.2024.100306].

Keirsbulck L., Cadot O., Lippert M., Boussemart D., Basley J., Delprat S., Paganelli S. (2024). Underbody flow control for base drag reduction of a real car model. Journal of Wind Engineering and Industrial Aerodynamics, 252, pp. 105822 [DOI=https://doi.org/10.1016/j.jweia.2024.105822].

Vaillard A.-S., Saget M., Braud F., Lippert M., Keirsbulck L., Jimenez M., Coffinier Y., Thomy V. (2023). Highly stable fluorine-free slippery liquid infused surfaces. Surfaces and Interfaces, 42, pp. 103296 [DOI=https://doi.org/10.1016/j.surfin.2023.103296].

Keirsbulck L., Cadot O., Basley J., Lippert M. (2023). Base suction, entrainment flux, and wake modes in the vortex formation region at the rear of a three-dimensional blunt bluff body. PHYSICAL REVIEW E, 108, pp. 15101 [DOI=https://doi.org/10.1103/PhysRevE.108.015101].

Plumejeau B., Keirsbulck L., Basley J., Lippert M., Delprat S., Abassi W. (2023). Drag mitigation by steady blowing and Coanda effect on a square back Ahmed body. European Journal of Mechanics - B/Fluids, 98, pp. 80-91. [IF=2.731] [DOI=https://doi.org/10.1016/j.euromechflu.2022.11.006].

Lippert M., Basley J., Keirsbulck L. (2022). On the reliability of aerodynamic balance time-series for closed-loop flow control. Measurement, 203, pp. 111953, ISSN 0263-2241. [IF=5.131] [DOI=https://doi.org/10.1016/j.measurement.2022.111953].

Ott C., Pivot C., Dubois P., Gallas Q., Delva J., Lippert M., Keirsbulck L. (2021). Pulsed jet phase-averaged flow field estimation based on neural network approach. Experiments in fluids, 62(4), pp. 1-16. [IF=2.335] [DOI=https://doi.org/10.1007/s00348-021-03180-0].

Plumejeau B., Keirsbulck L., Delprat S., Lippert M., Abassi W. (2020). Behavior of the square-back Ahmed body global modes at low ground clearance. Physical Review Fluids [DOI=https://doi.org/10.1103/PhysRevFluids.5.084701].

Chovet C., Feigesicht M., Plumejeau B., Lippert M., Keirsbulck L., Kerhervé F., Polyakov A., Richard J.-P., Abassi W., Foucaut J.-M. (2020). Sliding mode control applied to a square-back Ahmed body. European Journal of Mechanics - B/Fluids, 81, pp. 151-164 [DOI=https://doi.org/10.1016/j.euromechflu.2019.07.010].

Octau C., Dbouk T., Watremez M., Meresse D., Lippert M., Schiffler J., Keirsbulck L., Dubar L. (2020). Liquid-solid two-phase jet in a turbulent crossflow: Experiments and simulations. Chemical Engineering Research and Design, 155, pp. 156-171 [DOI=https://doi.org/10.1016/j.cherd.2020.01.004].

Octau C., Meresse D., Watremez M., Schiffler J., Lippert M., Keirsbulck L., Dubar L. (2020). Characterization of particulate matter emissions in urban train braking-An investigation of braking conditions influence on a reduced-scale device. https://doi.org/10.1007/s11356-020-08337-8 [DOI=https://doi.org/10.1007/s11356-020-08337-8].

Aloui F., Gaied L., Abassi W., Lippert M., Bigerelle M. (2019). Conductimetry technique for the measurement of thin liquid film thickness between two solid surfaces in relative motion: hydrodynamic lubrication. Mechanics & Industry, 20(6), pp. 601-610. [IF=0.95] [DOI=https://doi.org/10.1051/meca/2019035].

Fadla F., Alizard F., Keirsbulck L., Laval J.-P., Foucaut J.-M., Chovet C., Lippert M. (2019). Investigation of the dynamics in separated turbulent flow. European Journal of Mechanics-B/Fluids, 76, pp. 190-204 [DOI=https://doi.org/10.1016/j.euromechflu.2019.01.006].

Ott C., Gallas Q., Delva J., Lippert M., Keirsbulck L. (2019). High frequency characterization of a sweeping jet actuator. Sensors and Actuators A: Physical, 291, pp. 39-47 [DOI=https://doi.org/10.1016/j.sna.2019.03.034].

Chovet C., Lippert M., Keirsbulck L., Foucaut J.-M. (2019). Unsteady Behavior of a Backward-facing Step in Forced Flow. Flow, Turbulence and Combustion, 102, pp. 145-165 [DOI=https://doi.org/10.1007/s10494-018-9944-0].

Plumejeau B., Delprat S., Keirsbulck L., Lippert M., Abassi W. (2019). Ultra-local model-based control of the square-back Ahmed body wake flow. Physics of Fluids [DOI=https://doi.org/10.1063/1.5109320].

Cornu D., Lippert M., Kerhervé F., Aloui F., Keirsbulck L. (2018). Hydrodynamic oscillations inside deep cavities with wall offset. European Journal of Mechanics-B/Fluids, 72, pp. 403-409. [IF=2.183] [DOI=https://doi.org/10.1016/j.euromechflu.2018.04.013].

Chovet C., Lippert M., Foucaut J.-M., Keirsbulck L. (2017). Dynamical aspects of a backward-facing step flow at large Reynolds numbers. Experiments in Fluids, 58, ISSN 1432-1114 [DOI=10.1007/s00348-017-2444-5].

Graziani A., Lippert M., Uystepruyst D., Keirsbulck L. (2017). Scaling and flow dependencies over forward-facing steps. International Journal of Heat and Fluid Flow, 67, pp. 220-229, ISSN 0142-727X [DOI=https://doi.org/10.1016/j.ijheatfluidflow.2017.08.009].

Chovet C., Lippert M., Keirsbulck L., Foucaut J.-M. (2016). Dynamic characterization of piezoelectric micro-blowers for separation flow control. Sensors and Actuators A: Physical, 249, pp. 122-130, ISSN 0924-4247 [DOI=http://dx.doi.org/10.1016/j.sna.2016.08.016].

Cornu D., Keirsbulck L., Kerhervé F., Aloui F., Lippert M. (2016). On the vortex dynamics of shear-driven deep cavity flows with asymmetrical walls. Canadian Journal of Physics, 1344-1352, pp. 94. [IF=1.24] [DOI=10.1139/cjp-2016-0305].

Fadla F., Graziani A., Kerhervé F., Mathis R., Lippert M., Uystepruyst D., Keirsbulck L. (2016). Electrochemical Measurements for Real-Time Stochastic Reconstruction of Large-Scale Dynamics of a Separated Flow. Journal of Fluids Engineering, 138, ISSN 0098-2202 [DOI=10.1115/1.4034198].

Fadla F., Chovet R., Cornu D., Lippert M., Aloui F., Keirsbulck L. (2016). Spatial Resolution Correction for Electrochemical Wall-shear Stress Measurements using Rectangular Sensors. Journal of Applied Fluid Mechanics, 90 (3), pp. 1309-1319. [IF=1.405] [DOI=10.18869/ACADPUB.JAFM.68.228.23945].

Graziani A., Lippert M., Uystepruyst D., Keirsbulck L., Kerhervé F. (2015). On the connection between two low-frequency instabilities induced by the flow surrounding a foward facing step at high Reynolds number. Turbulence and interaction, 135, pp. 157-162, ISSN 978-3-319-60387-2 [DOI=https://doi.org/10.1007/978-3-319-60387-2_16].

Fadla F., Graziani A., Lippert M., Uystepruyst D., Keirsbulck L., Kerhervé F., Mathis R. (2015). Real-Time Reconstruction of Separated Flow Flapping Motion. Turbulence and interaction, 135, pp. 131-137, ISSN 978-3-319-60387-2 [DOI=https://doi.org/10.1007/978-3-319-60387-2_16].

Creyx M., Delacourt é., Lippert M., Morin C., Desmet B. (2014). Modélisation des performances d'un moteur Ericsson à cycle de joule ouvert. Revue Termotehnica, 1, pp. 64-70, ISSN 1222-4057

Leriche M., Harmand S., Lippert M., Desmet B. (2012). An Experimental and Analytical Study of a Variable Conductance Heat Pipe: Application to Vehicle Thermal Management. Applied Thermal Engineering, 38, pp. 48-57, ISSN 1359-4311. [IF=2.624]

Keirsbulck L., El hassan M., Lippert M., Labraga L. (2008). Control of cavity tones using a spanwise cylinder. Canadian Journal of Physics, 86, n° 12, pp. 355-1365, ISSN 0008-4204. [IF=0.756]

Mameri F., Delacourt é., Lippert M., Morin C. (2016). Modélisation 0D et caractérisation expérimentale d'une chaudière biomasse. Revista Termotehnica, ISSN ISSN 2247-1871

Gaied L., Berrich E., Lippert M., Keirsbulck L., Aloui F. (2021). Experimental Investigations on the Effect of a Wavy Surface on Hydrodynamic Instabilities in a Taylor-Couette System. ASME 2021 Fluids Engineering Division Summer Meeting, August 10–12, 2021, Volume 2: Fluid Applications and Systems; Fluid Measurement and Instrumentation, ASME Digital Collection, Virtual, Online, pp. FEDSM2021-65631, V002T04A016; 9 pages, octobre ., ISBN 978-0-7918-8529-1 [DOI=https://doi.org/10.1115/FEDSM2021-65631].

Gaied L., Aloui F., Lippert M., Berrich E. (2020). Experimental Investigations of the Surface Groove Effect in Taylor-Couette-Poiseuille Flow. ASME 2020 Fluids Engineering Division Summer Meeting collocated with the ASME 2020 Heat Transfer Summer Conference and the ASME 2020 18th International Conference on Nanochannels, Microchannels, and Minichannels, Volume 1: Fluid Applications and Systems; Fluid Measurement and Instrumentation, ASME Digital Collection, Virtual, Online, pp. Paper No: FEDSM2020-20326, V001T02A009; 7 pages, octobre ., ISBN 978-0-7918-8371-6 [DOI=https://doi.org/10.1115/FEDSM2020-20326].

Gaied L., Aloui F., Lippert M., Keirsbulck L., Bigerelle M. (2019). Influence of Surface Irregularities on Hydrodynamic Instabilities in Couette-Taylor Flow. ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference, Volume 1: Fluid Mechanics, ASME Digital Collection, July 28–August 1, 2019 San Francisco, California, USA, pp. Paper No: AJKFluids2019-4625, V001T01A081; 10 pages, novembre ., ISBN 978-0-7918-5902-5 [DOI=https://doi.org/10.1115/AJKFluids2019-4625].

Ott C., Gallas Q., Delva J., Lippert M., Keirsbulck L. (2019). Interaction between a jet and a turbulent boundary layer. AIAA Aviation 2019 Forum, Dallas (USA), janvier . [DOI=https://doi.org/10.2514/6.2019-3501].

Chovet C., Lippert M., Keirsbulck L., Noack B., Foucaut J.-M. (2018). Machine Learning Control for Experimental Turbulent Flow Targeting the Reduction of a Recirculation Bubble. ASME Proceedings | 12th Symposium on Flow Manipulation and Active Control, janvier . [DOI=10.1115/FEDSM2017-69272].

Octau C., Lippert M., Graziani A., Watremez M., Keirsbulck L., Dubar L., Dbouk T. (2017). Particles Transport in Railway Braking Systems: An Experimental and Numerical Investigation. ASME Proceedings | 15th International Symposium on Gas and Liquid-Solid Two-Phase Flows, juillet . [DOI=10.1115/FEDSM2017-69126].

Graziani A., Kerhervé F., Lippert M., Keirsbulck L., Uystepruyst D., Martinuzzi R. (2017). DYNAMICS OF THE RECIRCULATING AREAS OF A F ORWARD-FACING-STEP. International Symposium on Turbulence and Shear Flow Phenomena, Chicago, USA, juillet .

Chovet C., Keirsbulck L., Noack B., Lippert M., Foucaut J.-M. (2017). Machine learning control for experimental shear flows targeting the reduction of a recirculation bubble. IFAC-PapersOnLine, 50, pp. 12307 - 12311, juillet ., ISBN 2405-8963 [DOI=https://doi.org/10.1016/j.ifacol.2017.08.2157].

Cornu D., Keirsbulck L., Lippert M., Chovet R., Graziani A., Kerhervé F., Aloui F. (2016). Dynamical behavior over an asymmetrical deep cavity at high Reynolds numbers. RAILWAYS, Cagliari (Italy), avril .

Lalot S., El hassan M., Keirsbulck L., Lippert M., Labraga L. (2008). Neural models of a deep cavity. 19th International Symposium on Transport Phenomena, Reykjavik, Iceland, août .

El hassan M., Keirsbulck L., Labraga L., Lippert M. (2008). Control of deep cavity tones using a spanwise cylinder at low subsonic speeds. 6th International Conference on heat Transfer Fluid Mechanics and Thermodynamics, Pretoria, South Africa, juin .

Graziani A., Lippert M., Keirsbulck L., Uystepruyst D. (2017). Dépendance paramétrique de l'écoulement autour d'une marche montante à hauts nombres de Reynolds.. Congrès Français de Mécanique, Lille, août .

Aloui F., Gaied L., Abassi W., Lippert M., Bigerelle M. (2017). Measurement of thin liquid film thickness between two mechanical surfaces in relative movement using the conductimetry technique: Application for hydrodynamic lubrication. 23ème Congrès Français de Mécanique Lille, pp. 9 pages, août .

Cornu D., Keirsbulck L., Kerhervé F., Aloui F., Lippert M. (2017). Caractérisation des écoulements de cavité asymétriques. Congrès Français de Mécanique 2017, Lille, août .

Octau C., Lippert M., Dbouk T., Watremez M., Keirsbulck L., Dubar L. (2017). Etudes expérimentales et numériques d'un jet de particules : application au freinage ferroviaire. CFM 2017, Lille, août .

Chovet C., Keirsbulck L., Lippert M., Foucaut J.-M. (2017). Unsteady behaviour of separated and reattaching flows for a backward-facing step configuration at high Reynolds numbers. CFM 2017, Lille, août .

Octau C., Lippert M., Dbouk T., Watremez M., Keirsbulck L., Dubar L. (2017). Etudes expérimentales et numériques d'un jet de particules : application au freinage ferroviaire. Association Française de Mécanique, Lille, janvier .

Mameri F., Delacourt é., Lippert M., Morin C. (2016). Modélisation 0D et caractérisation expérimentale d'une chaudière biomasse. COFRET'16, Bucarest (Romania), juin .

Graziani A., Fadla F., Lippert M., Kerhervé F., Mathis R., Uystepruyst D., Keirsbulck L. (2015). Estimation stochastique d'un écoulement décollé en aval d'une bosse par méthode électrochimique. 22ème congrès français de mécanique, Lyon, août .

Creyx M., Delacourt é., Lippert M., Morin C., Desmet B. (2014). Modélisation des performances d'un moteur Ericsson à cycle de Joule ouvert. COFRET'14, Paris, avril .