FrançaisEnglishEspañol

accès directs

Annuaire
Espace numérique de travail
Laboratoires de recherche

Fahmi
CHAARI

  • Bâtiment CISIT

Physical problems understanding by developing new experimental and numerical tools for moderate and high strain rates

Diplômes universitaires

  • 2004 :

    PHD thesis in Mechanical engineering, ENS de Cachan

    Real-time Characterisation of the Development of Shear Induced Crystallization in Thermoplastics.

Expériences professionnelles

  • From 2004 to 2007 :
    Post doc position in the LAMIH lab.
  • From 2007 :
    Professor associate in the university of Valenciennes

Intervention TV, radio, audio-visuel

  • Co-organisation of international conference
    - 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS’2011), Valenciennes, France, June 28th-July 1st, 2011
    - 1st International THOMO Workshop (THOMO 2011), Valenciennes, France, April 7th, 2011
    - New advances in biomechanics for virtual human modelling mini symposium, 5th International Conference on Advances in Mechanical Engineering and Mechanics (TSS ICAMEM 2010), Hammamet, Tunisia, December 18th-20th, 2010

Enseignements antérieurs

  • Science des matériaux
    Environnement
    Hydraulique
    Thermodynamique, Energétique

Revue internationale avec comité de lecture

Hammami S., La barbera sosa J., Chaari F., Sadat T., Zouari B., Dubar L., Elleuch R. (2024). CuZn40Pb2 brass hot deformation behaviour modelling using Hansel Spittel constitutive model. Advances in Materials and Processing Technologies [DOI=https://doi.org/10.1080/2374068X.2024.2307097].

Petit A., Beaujouan D., Delille R., Chaari F., Langlet A. (2023). On the response of re-entrant auxetic structure under dynamic crushing. Mechanics & Industry, 24, pp. 43 [DOI=https://doi.org/10.1051/meca/2023040].

Notta-Cuvier D., Nciri M., Lauro F., Chaari F., Zouari B., Maalej Y. (2021). A pragmatic approach for modelling the viscoelastic-viscoplatic behaviour of short-fibre reinforced thermoplastics coupled with anisotropic damage. Applied Composite Materials, 28 (2), pp. 341-368. [IF=2.199] [DOI=10.1007/s10443-020-09855].

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Delille R., Haugou G., Maalej Y., Zouari B. (2019). Performance over a wide range of strain rate of polypropylene reinforced by short alfa fibres. Polymer Composites. Polymer Composites, 40 (7), pp. 2850-2862. [IF=1.943]

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Maalej Y., Zouari B. (2019). Viscoelastic-viscoplastic model for short-fiber-reinforced composites with complex fibre orientation. Mechanics of Advanced Materials and Structures, 160, pp. 516-528. [IF=1.196] [DOI=http://dx.doi.org/10.1080/15376494.2018.1430264].

Tounsi R., Haugou G., Chaari F., Leconte N., Markiewicz é. (2019). Experimental characterization of the mechanical behaviour and the failure of multi-sheet and multi-material spot welded assembly. International Journal of Impact Engineering, 130, pp. 226-238

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Maalej Y., Zouari B. (2017). Modelling and characterisation of dynamic behaviour of short-fibre-reinforced composites. Composite Structures, 160, pp. 516-528. [IF=3.853] [DOI=http://dx.doi.org/10.1016/j.compstruct.2016.10.083].

Chtourou R., Leconte N., Chaari F., Haugou G., Markiewicz é., Zouari B. (2017). Macro-modeling of the strength and failure of multi-layer multi-steel grade spot welds: Connector formulation, assembly model and identification procedure. Thin-Walled Structures, 113, pp. 228–239 [DOI=http://dx.doi.org/10.1016/j.tws.2017.01.023].

Chtourou R., Leconte N., Zouari B., Chaari F., Markiewicz é., Langrand B. (2017). Macro-modeling of spot weld strength and failure: formulation and identification procedure based on pure and mixed modes of loading. Engineering Computations, 34 (3), pp. 941-959 [DOI=http://dx.doi.org/10.1108/EC-03-2016-0081]].

Hentati H., Kriaa Y., Haugou G., Chaari F., Wali M., Zouari B., Dammak F. (2017). nfluence of elastic wave on crack nucleation – Experimental and computational investigation of brittle fracture. Applied Acoustics 2017. [IF=1.462] [DOI=https://doi.org/10.1016/j.apacoust.2017.04.019].

Tounsi R., Markiewicz é., Zouari B., Chaari F., Haugou G. (2017). Numerical investigation, experimental validation and macroscopic yield criterion of Al5056 honeycombs under mixed shear-compression loading. International Journal of Impact Engineering 2017. [IF=2.646] [DOI=https://doi.org/10.1016/j.ijimpeng.2017.05.001].

Notta-Cuvier D., Nciri M., Lauro F., Delille R., Chaari F., Robache F., Haugou G., Maalej Y. (2016). Coupled influence of strain rate and heterogeneous fibre orientation on the mechanical behaviour of short-glass-fibre reinforced polypropylene. Mechanics of Materials, 100, pp. 186-197, ISSN 0167-6636. [IF=2.636] [DOI=10.1016/j.mechmat.2016.06.013].

Tounsi R., Markiewicz é., Haugou G., Chaari F., Zouari B. (2016). Combined effects of the in-plane orientation angle and the loading angle on the dynamic enhancement of honeycombs under mixed shear-compression loading. The European Physical Journal Special Topics (EPJST), 225 (2), pp. 243–252 [DOI=10.1140/epjst/e2016-02632-9].

Tounsi R., Markiewicz é., Haugou G., Chaari F., Zouari B. (2016). Dynamic behaviour of honeycombs under mixed shear-compression loading: experiments and analysis of combined effects of loading angle and cells in-plane orientation. Int J. Solids and Structures, 80, pp. 501-511 [DOI=dx.doi.org/10.1016/j.ijsolstr.2015.10.010].

Balieu R., Lauro F., Bennani B., Haugou G., Chaari F., Matsumoto T., Mottola E. (2015). Damage at high strain rates in semi-crystalline polymers. International Journal of Impact Engineering, 76, pp. 1-8, ISSN 0734-743X. [IF=2.01] [DOI=10.1016/j.ijimpeng.2014.08.013].

Maalej Y., Chaari F., Zouari B., Markiewicz é. (2014). Close form solution for the collapse of polygonal thin-walled columns in the axial crushing case. Journal of theoritical and applied mechanics, 52, 3, pp. 707-718. [IF=0.452]

Tounsi R., Zouari B., Chaari F., Markiewicz é., Haugou G., Dammak F. (2013). Reduced numerical model to investigate the dynamic behaviour of honeycombs under mixed shear-compression loading. Thin-Walled Structures, ISSN 0263-8231. [IF=1.231] [DOI=10.1016/j.tws.2013.08.016].

Mayeur O., Haugou G., Chaari F. (2013). Anisotropy and strain rate effects on bovine cortical bone: combination of high-resolution imaging and dynamic loading. Computer Methods in Biomechanics and Biomedical Engineering, 16(s1), pp. 206-208, ISSN 1025-5842. [IF=1.393] [DOI=10.1080/10255842.2013.815931].

Le corroller T., Pithioux M., Chaari F., Rosa B., Parratte S., Maurel B., Argenson J., Champsaur P., Chabrand P. (2013). Bone texture analysis is correlated with three-dimensional microarchitecture and mechanical properties of trabecular bone in osteoporotic femurs. Journal of Bone and Mineral Metabolism, 31(1), pp. 82-88, ISSN 0914-8779. [IF=2.219]

Mayeur O., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Analysis of the cortical bone thickness of human thorax based on multi-scale imaging techniques. Computer Methods in Biomechanics and Biomedical Engineering, 15(S1), pp. 279-280, ISSN 1025-5842. [IF=1.393]

Halgrin J., Chaari F., Markiewicz é. (2012). On the effect of marrow in the mechanical behaviour and crush response of trabecular bone. Journal of the Mechanical Behavior of Biomedical Materials, 5(1), pp. 231-237, ISSN 1751-6161. [IF=2.368]

Rahmoun J., Chaari F., Markiewicz é., Drazetic P. (2009). Micromechanical modeling of the anisotropy of elastic biological composites. Multiscale Modeling and Simulation, 8(1), pp. 326-336, ISSN 1540-3459. [IF=2.198]

Chaari F., Halgrin J., Markiewicz é., Drazetic P. (2009). Spongy bone deformation mechanisms : experimental and numerical studies. european journal of computational mechanics, 18(1), pp. 67-79, ISSN 1779-7179

Chaari F., Markiewicz é., Drazetic P. (2007). Identification of the spongy bone mechanical behaviour under compression loads: numerical simulation versus experimental results. International Journal of Crashworthiness, 12(3), pp. 247-253, ISSN 1358-8265

Revue nationale avec comité de lecture

Halgrin J., Chaari F., Markiewicz é., Drazetic P. (2010). Influence de l'architecture cellulaire de l'os spongieux sur sa réponse mécanique. Mécanique et Industries, 11(3-4), pp. 203-208, ISSN 1296-2139

Actes de congrès organisé par le LAMIH

Bourel B., Canaple B., Chaari F., Coutellier D., Haugou G., Kaczmarek R., Lauro F., Markiewicz é., Naceur H., Rahmoun J. (2011). 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011). , Valenciennes, France

Conférence internationale avec actes et comité de lecture

Hammami S., La barbera sosa J., Chaari F., Sadat T., Zouari B., Dubar L., Elleuch R. (2021). Preliminary Thermo-mechanical Characterization of Brass Alloys. International Conference Design and Modeling of Mechanical Systems, janvier .

Chtourou R., Chaari F., Haugou G., Leconte N., Markiewicz é., Zouari B. (2018). Experimental study of the mechanical strength and the failure of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions. 12th DYMAT Conference, Arcachon (France), septembre .

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Delille R., Robache F., Haugou G. (2018). Modelling of damageable strain-rate-dependent behaviour of short fibre reinforced thermoplastics. 2nd International Conference on Impact Loading of Structures and Materials (ICILSM), Xi'an (Chine), mai .

Chtourou R., Leconte N., Chaari F., Zouari B., Markiewicz é., Haugou G. (2018). Macroscopic FE modeling of the tensile strength and the failure of asymmetric multi-layer multi-steel grade spot welded assembly. 2nd ICILSM 2nd International Conference on Impact Loading of Structures and Materials, Xi'an (Chine), mai .

Notta-Cuvier D., Nciri M., Lauro F., Maalej Y., Chaari F., Zouari B. (2017). A dynamic model of behaviour of short-fibre-reinforced thermoplastics taking into account the natural variability of constitutive, geometrical and mechanical properties of vegetal fibres. 3rd International Conference on Natural Fibers (ICNF), Braga, Portugal, juin .

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Zouari B., Maalej Y. (2016). A model for non-linear dynamic behaviour of short fibre reinforced composites. A3M'2016, Hammamet, Tunisia, décembre .

Chtourou R., Leconte N., Chaari F., Haugou G., Markiewicz é., Zouari B. (2016). Experimental characterisation and macro-modeling of the mechanical behaviour of three-sheet multi-steel grade spot welded assembly. International Conference on Advanced Materials, Mechanics and Manufacturing (A3M2016), Hammamet (Tunisie), décembre .

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Maalej Y., Zouari B. (2016). Modeling non-linear strain rate dependent behaviour of short-fibre reinforced composites. ICILSM, Torino, Italia, mai .

Lauro F., Balieu R., Bennani B., Haugou G., Bourel B., Chaari F., Matsumoto T., Mottola E. (2015). Damage characterization for particles filled semi-crystalline polymer. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401009].

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Zouari B., Maalej Y. (2015). A viscoelastic-viscoplastic model for short-fibre reinforced polymers with complex fibre orientations. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159404008].

Chtourou R., Haugou G., Leconte N., Zouari B., Chaari F., Markiewicz é. (2015). Experimental characterization and macro-modeling of mechanical strength of multi-sheets and multi-materials spot welds under pure and mixed modes I and II. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401032].

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é. (2013). Dynamic behavior of aluminum honeycombs under mixed compression/shear loadings and effects of cells in-plane orientations. IUTAM Symposium on Recent Development of Experimental Techniques Under Impact Loading, Xi'an, China, mai .

Mayeur O., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Analysis of the cortical bone thickness of human thorax based on multi-scale imaging techniques. 37th congress of the “société de biomécanique”, Toulouse, France, octobre .

Mayeur O., Haugou G., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Development of New Hopkinson's Device Dedicated to Rib's Bone Characterisation. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Mayeur O., Haugou G., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Strain Rate and Anisotropy Effects on Mechanical Behaviour of Cortical Bone. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2012). Experimental study of aluminium honeycomb behavior under dynamic multiaxial loading: effects of the in-plane orientation. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Mayeur O., Delattre J., Kinding M., Delille R., Chaari F., Lesueur D., Baudrit P., Drazetic P. (2011). Numerical Anthropometry Comparison between the THOMO PMHS and GHBMC Model. 38th International Workshop on Injury Biomechanics Research, Detroit, USA, novembre .

Rahmoun J., Halgrin J., Naceur H., Markiewicz é., Chaari F., Drazetic P. (2011). Multi-scale modeling of the trabecular bone mechanical behaviour. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Tounsi R., Chaari F., Zouari B., Dammak F., Haugou G., Markiewicz é. (2011). Quasi-static and dynamic behavior of aluminum honeycomb under multiaxial load: numerical experiments. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Mayeur O., Markiewicz é., Drazetic P., Haugou G., Chaari F. (2011). Quasi-static and dynamic behaviour of the bone structures with fine geometric and materials modelling aspects. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2011). Dynamic behaviour of aluminium honeycomb undermultiaxial load: numerical experiments. 3th International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, juin .

Mayeur O., Baudrit P., Chaari F., Delille R., Drazetic P. (2011). Human Body Modelling: Simplified Model of the Thorax. 3th International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, juin .

Tounsi R., Zouari B., Chaari F., Dammak F., Markiewicz é. (2010). Numerical modeling of quasi-static crush behavior of aluminum honeycomb under multi-axial loads. International Conference on Advances in Mechanical Engineering and Mechanics, Hammamet, Tunisia, décembre .

Mayeur O., Chaari F., Delille R., Guillemot H., Drazetic P. (2010). Virtual human thorax model reconstruction: from medical imaging to finite element model. International Conference on Advances in Mechanical Engineering and Mechanics, Hammamet, Tunisia, décembre .

Mayeur O., Chaari F., Delille R., Guillemot H., Drazetic P. (2010). Virtual Human Thorax Model : a new method to determine rib geometry. International Research Council on the Biomechanics of injury, Hanover, Germany, septembre .

Mayeur O., Chaari F., Delille R., Guillemot H., Drazetic P. (2010). A new method to determine rib geometry for a personalized FEM of the thorax. 6th World Congress on Biomechanics, Singapore, août .

Mayeur O., Chaari F., Delille R., Guillemot H., Drazetic P. (2010). A new method to determine rib geometry for a personalized FEM of the thorax. 6th Injury Biomechanics Symposium, Ohio State University, USA, mai .

Rahmoun J., Halgrin J., Chaari F., Markiewicz é., Drazetic P. (2009). Micromechanical modeling of the anisotropy of elastic biological composites - Theory and fundamental concepts. Proceeding of the Fourth International Conference on Multiscale Materials Modeling, Tallahassee, Florida, USA, pp. 327-330, octobre .

Halgrin J., Chaari F., Markiewicz é., Drazetic P. (2007). Spongy bone mechanical behaviour under quasi static to dynamic loadings: development of an equivalent physical model.. Modelling of Heterogeneous Materials, Prague, Czech Republic., juin .

Chaari F., Markiewicz é., Drazetic P. (2006). Identification of the spongy bone mechanical behaviour under compression loads: numerical simulation versus experimental results. International Crashworthiness Conference, Athens, Greece, juillet .

Baivier S., Chaari F., Markiewicz é., Drazetic P. (2005). A micro-finite element reconstruction for identifing spongy bone mechanical behaviour. XXXème Congrès de la Biomécanique, Bruxelles, Belgique, septembre .

Conférence nationale avec actes et comité de lecture

Leconte N., Chaari F., Haugou G., Markiewicz é. (2023). Construction d'un critère de rupture prenant en compte la qualité des points soudés par résistance. Les Assemblages mécaniques - Evolutions récentes et perspectives (5ème Colloque Assemblages), Saint-Ouen, France, juillet .

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Zouari B., Maalej Y. (2017). A coupled viscoelastic-viscoplastic model for short-fibre reinforced composites. Congrès Français de Mécanique (CFM) 2017, Lille (France), août .

Chtourou R., Chaari F., Haugou G., Leconte N., Markiewicz é., Zouari B. (2017). Experimental characterisation of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions. CFM2017, Lille (France), août .

Notta-Cuvier D., Nciri M., Lauro F., Chaari F., Delille R., Robache F., Haugou G., Maalej Y., Zouari B. (2016). Variabilité des propriétés constitutives, géométriques et mécaniques des fibres végétales : quel impact sur le comportement mécanique de composites à fibres courtes ?. 2ème édition des Journées Jeunes Chercheurs Eco-composites et Composites Bio-sourcés, IFMA/SIGMA, Clermont-Ferrand (France), avril .

Notta-Cuvier D., Nciri M., Lauro F., Chaari F., Delille R., Robache F., Haugou G., Maalej Y., Zouari B. (2016). Comportement sous sollicitations dynamiques de thermoplastiques renforcés par fibres courtes: Influence couplée de la vitesse de déformation et des distributions d'orientation des fibres. Journées du Groupe de Travail MécaDymat, Icube, Illkirch (France), mars .

Chtourou R., Zouari B., Chaari F., Leconte N., Maalej Y., Markiewicz é. (2014). Modélisation du comportement non-linéaire d'un point soudé par un élément équivalent. Congrès Tunisien de Mécanique, COTUME 2014, Sousse, Tunisie, mars .

Markiewicz é., Tounsi R., Zouari B., Chaari F., Haugou G. (2013). Comportement dynamique des NIDA Al sous chargements mixtes Compression/Cisaillement et effets de l'angle d'orientation des cellules. Journées MECADYMAT 2013, Brest, avril .

Halgrin J., Rahmoun J., Chaari F., Markiewicz é., Drazetic P. (2009). Comportement mécanique de l'os trabéculaire : couplage expérimentation-simulation numérique. 19ième Congrès Français de Mécanique, Marseille, août .

Halgrin J., Rahmoun J., Chaari F., Markiewicz é., Drazetic P. (2009). Influence de l'architecture cellulaire de l'os spongieux sur sa réponse mécanique. Raous, M., Pasquet, P., Rey, C., Actes du 9ème colloque national en calcul de structures, 1, LMT-Cachan, Giens, France, pp. 407-418, mai ., ISBN 978-2-11-098374-9

Chaari F., Halgrin J., Markiewicz é., Drazetic P. (2008). Comportement mécanique de l'os spongieux pour la modélisation virtuelle de l'être humain. Congrès Tunisien de Mécanique, Hammamet, Tunisie, mars .

Chaari F., Markiewicz é., Drazetic P. (2007). Comportement Mécanique de l'os spongieux. Construction de modèles éléments finis par Micro-Tomographie.. 15èmes Journées Nationales sur les Composites, Marseille, juin .

Chaari F., Markiewicz é., Drazetic P. (2006). Analyse Éléments Finis du comportement mécanique de l'os spongieux. Colloque Sécurité dans le Transport, Bordeaux, octobre .

Markiewicz é., Baivier S., Chaari F., Drazetic P. (2005). Caractérisation expérimentale et numérique du comportement de l'os spongieux. 1ères Journées de Modélisation numérique en Biomécanique, CSMA, Saint-Etienne, France, avril .

Séminaire et autres communications

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2012). Impact behavior of honeycombs under dynamic multiaxial loading. 2nd DYMAT Student Camp, Tampere, Finland, juin .

Mayeur O., Haugou G., Chaari F., Drazetic P., Markiewicz é. (2012). Improvement of the strain-stress relationships of the cortical bone using refined geometrical data. 2nd DYMAT Student Camp, Tampere, Finland, juin .

Mayeur O., Chaari F., Delille R., Lesueur D., Drazetic P. (2011). From Medical Imaging at Different Scales to Thorax Geometrical Characterisation. THOMO 2011 International Workshop, Valenciennes, France, avril .

Mayeur O., Chaari F., Delille R., Guillemot H., Drazetic P. (2010). From Medical Imaging to Numerical Model: a Personalised FE Model of the Thorax. GDR 2610, Impact Biomechanics Seminar, Paris, France, novembre .

Rapport de contrat de recherche

Leconte N., Chtourou R., Nguyen T., Markiewicz é., Chaari F., Haugou G. (2016). Modélisation macroscopique d'un assemblage soudé 3 tôles multi-matériaux. Rapport projet ANR ASAP, LAMIH, Valenciennes, janvier .

Mayeur O., Delattre J., Chaari F., Delille R., Lesueur D., Drazetic P. (2012). Acquisition of the ribcage geometrical properties. Report of Project THOMO, Development of a finite element model of the human thorax and upper extremities, UVHC, LAMIH, Valenciennes, janvier .

Mayeur O., Delattre J., Chaari F., Delille R., Lesueur D., Drazetic P. (2012). Acquisition of the ribcage mechanical properties. Report of Project THOMO, Development of a finite element model of the human thorax and upper extremities, UVHC, LAMIH, Valenciennes, janvier .

Mayeur O., Delattre J., Chaari F., Delille R., Lesueur D., Drazetic P. (2012). Personalization of the template model. Report of Project THOMO, Development of a finite element model of the human thorax and upper extremities, UVHC, LAMIH, Valenciennes, janvier .

Mayeur O., Delattre J., Chaari F., Delille R., Lesueur D., Drazetic P. (2012). Definition of the skeleton geometrical properties. Report of Project THOMO, Development of a finite element model of the human thorax and upper extremities, UVHC, LAMIH, Valenciennes, janvier .

Drazetic P., Mayeur O., Chaari F., Delille R., Lesueur D., Anceau J.-H. (2010). Human mechanical properties. 18 Month Report of Project THOMO, Development of a finite element model of the human thorax and upper extremities, UVHC, LAMIH, Valenciennes, juillet .

Bertrand S., Drazetic P., Mayeur O., Chaari F., Delille R., Lesueur D., Anceau J.-H. (2010). Literature review : Mechanical tests on isolated Human Ribs. Report of Project THOMO, Development of a finite element model of the human thorax and upper extremities, UVHC, LAMIH, Valenciennes, janvier .