Gregory
HAUGOU

Haugou G., Morvan H., Guérin J.-D., Markiewicz é. (2024). Evaluation of compression behaviour of 316L SS Gyroid and Diamond structures using SLM process – Experimental programme under static and dynamic compression loadings. International Journal of Impact Engineering, pp. 105147 [DOI=https://doi.org/10.1016/j.ijimpeng.2024.105147].

Zielinski B., Sadat T., Lukic B., Haugou G., Morvan H., Rack A., Markiewicz é., Dubar L. (2023). Characterization of local mechanical properties of Al/Cu Magnetic Pulse Welded Joints under high strain rates using synchrotron X-Ray Imaging. Materials Letters, 337, ISSN 0167-577X. [IF=3.574] [DOI=https://doi.org/10.1016/j.matlet.2023.133943].

Carassus H., Guérin J.-D., Morvan H., Haugou G., Sadat T., Guerard S., Markiewicz é. (2022). An experimental investigation into influences of build orientation and specimen thickness on quasi-static and dynamic mechanical responses of selective laser melting 316L Stainless steel. Materials Science and Engineering : A, 835 [DOI=https://doi.org/10.1016/j.msea.2022.142683].

Hiricoiu A., Haugou G., Naceur H., Guérin J.-D., Coutellier D., Bigerelle M. (2021). On the characterization and modeling of the strain rate effects of EBM and SLM processes on Ti–6Al–4V ELI. Part I: Analysis of raw parts. under review in Materials, ISSN 1996-1944. [IF=3.1]

Sadat T., Hayashi K., Haugou G., Morvan H., Markiewicz é., Dubar L., Bigerelle M., Ameyama K., Dirras G. (2021). Mechanical properties of spark plasma sintering-processed pure Ti and Ti-6Al-4V Alloys: a comparative study between harmonic and non-harmonic microstructures. Compouds 2021, 1, pp. (41-57) [DOI=https://doi.org/10.3390/compounds1010005].

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Delille R., Haugou G., Maalej Y., Zouari B. (2019). Performance over a wide range of strain rate of polypropylene reinforced by short alfa fibres. Polymer Composites. Polymer Composites, 40 (7), pp. 2850-2862. [IF=1.943]

Bracq A., Delille R., Bourel B., Maréchal C., Haugou G., Lauro F., Roth S., Mauzac O. (2019). Numerical Recreation of Field Cases on a Biofidelic Human FE Model Involving Deformable Less-Lethal Projectiles. Human Factors and Mechanical Engineering for Defense and Safety [DOI=https://doi.org/10.1007/s41314-019-0022-8].

Bertolini R., Bruschi S., Ghiotti A., Haugou G., Morvan H., Dubar L. (2019). Material behaviour at low temperatures for calibrating cryogenic machining numerical simulations. 17th CIRP Conference on Modelling of Machining Operations, 82, pp. 344-349

Tounsi R., Haugou G., Chaari F., Leconte N., Markiewicz é. (2019). Experimental characterization of the mechanical behaviour and the failure of multi-sheet and multi-material spot welded assembly. International Journal of Impact Engineering, 130, pp. 226-238

Bracq A., Haugou G., Bourel B., Maréchal C., Lauro F., Roth S., Mauzac O. (2018). On the modeling of a visco-hyperelastic polymer gel under blunt ballistic impacts. International Journal of Impact Engineering, 118, pp. 78–90. [IF=2.938] [DOI=https://doi.org/10.1016/j.ijimpeng.2018.04.001].

Karkar M., Maréchal C., Delille R., Haugou G., Bresson F., Drazetic P., Colard T. (2018). INFLUENCE OF THE BONE MORPHOLOGY ON MECHANICAL BEHAVIOR OF HUMAN SKULL FOR TWO STRAIN RATE CASES. Journal of Mechanics in Medicine and Biology, 18, n°4, pp. 1-14 [DOI=10.1142/S021951941850046X].

Wouts J., Haugou G., Oudjene M., Naceur H., Coutellier D. (2018). Confinement device to assess dynamic crushability of wood material. Journal of Mechanical Engineering Science: Part C, 232 (8), pp. 1418-1432, ISSN 2041-2983

Bracq A., Haugou G., Bourel B., Delille R., Maréchal C., Lauro F., Roth S., Mauzac O. (2018). Characterization of a visco-hyperelastic synthetic gel for ballistic impacts assessment. Dynamic Behavior of Materials, 1, pp. 109-113

Wouts J., Haugou G., Oudjene M., Morvan H., Coutellier D. (2018). Strain rate effects on the compressive response of wood and energy absorption capabilities–Part B: Experimental investigation under rigid lateral confinement. Composite Structures, 204, pp. 95-104

Haugou G., Morvan H., Leconte N. (2018). Direct compression loading using the pre-stretched bar technique: Application to high strains under moderate strain rates. Dynamic Behavior of Materials, 1, pp. 169-173

Chtourou R., Leconte N., Chaari F., Haugou G., Markiewicz é., Zouari B. (2017). Macro-modeling of the strength and failure of multi-layer multi-steel grade spot welds: Connector formulation, assembly model and identification procedure. Thin-Walled Structures, 113, pp. 228–239 [DOI=http://dx.doi.org/10.1016/j.tws.2017.01.023].

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2017). Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint. Mechanics & Industry, 18 (3) [DOI=10.1051/meca/2016045].

Treutenaere S., Lauro F., Bennani B., Haugou G., Matsumoto T., Mottola E. (2017). Constitutive modelling of the strain-rate dependency of fabric reinforced polymers. International Journal of Impact Engineering, 108, pp. 361-369. [IF=2.646] [DOI=10.1016/j.ijimpeng.2017.04.010].

Hentati H., Kriaa Y., Haugou G., Chaari F., Wali M., Zouari B., Dammak F. (2017). nfluence of elastic wave on crack nucleation – Experimental and computational investigation of brittle fracture. Applied Acoustics 2017. [IF=1.462] [DOI=https://doi.org/10.1016/j.apacoust.2017.04.019].

Tounsi R., Markiewicz é., Zouari B., Chaari F., Haugou G. (2017). Numerical investigation, experimental validation and macroscopic yield criterion of Al5056 honeycombs under mixed shear-compression loading. International Journal of Impact Engineering 2017. [IF=2.646] [DOI=https://doi.org/10.1016/j.ijimpeng.2017.05.001].

Bracq A., Haugou G., Delille R., Lauro F., Roth S., Mauzac O. (2017). Experimental study of the strain rate dependence of a synthetic gel for ballistic blunt trauma assessment. Journal of the Mechanical Behavior of Biomedical Materials, 72, pp. 138–147. [IF=3.11] [DOI=doi:10.1016/j.jmbbm.2017.04.027].

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2017). Influence of the heat affected zone on the dynamic behavior of an armored steel fillet welded joint. Int. J. Impact Engineering, 104, pp. 154-163 [DOI=doi.org/10.1016/j.ijimpeng.2016.12.022].

Notta-Cuvier D., Bouzouita A., Delille R., Haugou G., Raquez J.-M., Lauro F., Dubois P. (2016). Design of toughened PLA based material for application in structures subjected to severe loading conditions. Part 1. Quasi-static and dynamic tensile tests at ambient temperature. Polymer Testing, 54, pp. 233-243. [IF=2.35]

Dufour L., Bourel B., Lauro F., Haugou G., Leconte N. (2016). A viscoelastic-viscoplastic model with non associative plasticity for the modelling of bonded joints at high strain rates. International Journal of Adhesion & Adhesives, 70, pp. 304-314. [IF=1.956]

Notta-Cuvier D., Nciri M., Lauro F., Delille R., Chaari F., Robache F., Haugou G., Maalej Y. (2016). Coupled influence of strain rate and heterogeneous fibre orientation on the mechanical behaviour of short-glass-fibre reinforced polypropylene. Mechanics of Materials, 100, pp. 186-197, ISSN 0167-6636. [IF=2.636] [DOI=10.1016/j.mechmat.2016.06.013].

Wouts J., Haugou G., Oudjene M., Coutellier D., Morvan H. (2016). Strain rate effects on the compressive response of wood and energy absorption capabilities--Part A: Experimental investigations. Composite Structures, 149, pp. 315-328, ISSN 0263-8223. [IF=3.853] [DOI=http://dx.doi.org/10.1016/j.compstruct.2016.03.058].

Haugou G., Leconte N., Morvan H. (2016). Design of a pre-stretched tension Hopkinson bar device: Configuration, tail corrections, and numerical validation. International Journal of Impact Engineering, 97, pp. 89–101

Tounsi R., Markiewicz é., Haugou G., Chaari F., Zouari B. (2016). Combined effects of the in-plane orientation angle and the loading angle on the dynamic enhancement of honeycombs under mixed shear-compression loading. The European Physical Journal Special Topics (EPJST), 225 (2), pp. 243–252 [DOI=10.1140/epjst/e2016-02632-9].

Tounsi R., Markiewicz é., Haugou G., Chaari F., Zouari B. (2016). Dynamic behaviour of honeycombs under mixed shear-compression loading: experiments and analysis of combined effects of loading angle and cells in-plane orientation. Int J. Solids and Structures, 80, pp. 501-511 [DOI=dx.doi.org/10.1016/j.ijsolstr.2015.10.010].

Morin D., Haugou G., Lauro F., Bennani B., Bourel B. (2015). Elasto-viscoplasticity Behaviour of a Structural Adhesive Under Compression Loadings at Low, Moderate and High Strain Rates. Journal of Dynamic Behavior of Materials, 1, pp. 124-135, ISSN 2199-7446 [DOI=10.1007/s40870-015-0010-x].

Balieu R., Lauro F., Bennani B., Haugou G., Chaari F., Matsumoto T., Mottola E. (2015). Damage at high strain rates in semi-crystalline polymers. International Journal of Impact Engineering, 76, pp. 1-8, ISSN 0734-743X. [IF=2.01] [DOI=10.1016/j.ijimpeng.2014.08.013].

Maréchal C., Karkar M., Delille R., Haugou G., Bresson F., Colard T. (2013). Original experimental ballistic set-up for mechanical behaviour characterisation of the cranial bone. Computer Methods in Biomechanics and Biomedical Engineering, 16(S1), pp. 209-210, ISSN 1025-5842. [IF=1.393]

Tounsi R., Zouari B., Chaari F., Markiewicz é., Haugou G., Dammak F. (2013). Reduced numerical model to investigate the dynamic behaviour of honeycombs under mixed shear-compression loading. Thin-Walled Structures, ISSN 0263-8231. [IF=1.231] [DOI=10.1016/j.tws.2013.08.016].

Mayeur O., Haugou G., Chaari F. (2013). Anisotropy and strain rate effects on bovine cortical bone: combination of high-resolution imaging and dynamic loading. Computer Methods in Biomechanics and Biomedical Engineering, 16(s1), pp. 206-208, ISSN 1025-5842. [IF=1.393] [DOI=10.1080/10255842.2013.815931].

Halgrin J., Shiri S., Maréchal C., Haugou G., Bresson F., Colard T. (2012). Experimental and numerical characterisation of the mechanical behaviour of the cranial bone. Computer Methods in Biomechanics and Biomedical Engineering, 15(S1), pp. 313-315, ISSN 1025-5842. [IF=1.393]

Morin D., Haugou G., Bennani B., Lauro F. (2011). Experimental characterization of a toughened epoxy adhesive under a large range of strain rates. Journal of Adhesion Science and Technology, 25(13), pp. 1581–1602, ISSN 0169-4243. [IF=0.948]

Maréchal C., Bresson F., Haugou G. (2011). Development of a numerical model of the 9mm parabellum fmj bullet including jacket failure. Engineering Transactions, 59(4), pp. 263-272, ISSN http://et.ippt.gov.pl/

Morin D., Haugou G., Bennani B., Lauro F. (2010). Identification of a new failure criterion for toughened epoxy adhesive. Engineering fracture mechanics, 77(17), pp. 3481-3500, ISSN 0013-7944. [IF=1.571]

Halgrin J., Haugou G., Markiewicz é., Rota L. (2008). Integrated simplified crash modelling approach dedicated to pre-design stage: evaluation on a front car part. International Journal of Vehicle Safety, 3(1), pp. 91-115, ISSN 1479-3105

Haugou G., Markiewicz é., Fabis J. (2006). On the use of the non direct tensile loading on a classical split Hopkinson bars apparatus dedicated to sheet metal specimens characterisation ". International Journal of Impact Engineering, 32, pp. 778-798, ISSN 1358-8265

Haugou G., Markiewicz é., Fabis J., Gary G. (2004). Contribution to the definition of a partial overlapping plastic strain rates domain for moderate loadings – Application to tensile testing on metallic materials. Int. Journal of Crashworthiness, 9 (2), pp. 187 - 194

Markiewicz é., Ducrocq P., Drazetic P., Haugou G., Fourmentraux T., Berard J.-Y. (2001). Material behaviour law identification for the various zones of the spolt-weld. Int. Journal of Material and Product, 16, pp. 484-509

Haugou G., Fabis J., Drazetic P. (2006). Caractérisation dynamique aux barres de Hopkinson par chargement indirect en traction d'éprouvettes métalliques collées. Mécanique et Industries, 7, pp. 1-11, ISSN 1269-2139

Fabis J., Haugou G., Markiewicz é., Drazetic P. (2002). Caractérisation dynamique du comportement des matériaux, des assemblages et des structures. Application au crash et à l'impact. Revue Scientifique et Technique de la Défense, 56, pp. 47-51

Bourel B., Canaple B., Chaari F., Coutellier D., Haugou G., Kaczmarek R., Lauro F., Markiewicz é., Naceur H., Rahmoun J. (2011). 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011). , Valenciennes, France

Bracq A., Haugou G., Morvan H. (2019). Constitutive Modeling of Polyamide Split Hopkinson Pressure Bars for the Design of a Pre-stretched Apparatus. Kimberley, J., Lamberson, L.E., Mates, S. (Eds.), 1, Dynamic Behavior of Materials,Springer International Publishing, pp. 201-205 [DOI=10.1007/978-3-319-95089-1_36].

Bracq A., Haugou G., Bourel B., Delille R., Maréchal C., Lauro F., Roth S., Mauzac O. (2018). Characterization of a Visco-Hyperelastic Synthetic Gel for Ballistic Impacts Assessment. Kimberley J., Lamberson L., Mates S. (eds), 1, Dynamic Behavior of Materials, pp. 109-113 [DOI=10.1007/978-3-319-62956-8_19].

Notta-Cuvier D., Bouzouita A., Odent J., Delille R., Murariu M., Lauro F., Raquez J.-M., Haugou G., Dubois P. (2018). L'acide polylactique (PLA) pour des applications automobiles. Edition des Techniques de l'Ingénieur, RE 273, pp.

Morin D., Haugou G., Lauro F., Bennani B. (2011). Elasto-viscoplasticity behaviour of a structural adhesive under compression loadings. Dynamic behavior of materials, 1, T. Proulx (Eds.), pp. 369-377 [DOI=10.1007/978-4419-8228-5_55].

Morvan H., Haugou G., Carassus H., Guérin J.-D., Guerard S., Markiewicz é. (2023). Evaluation of Dynamic behavior of typical triply periodic minimal surface additively-manufactured structures. SEM 2023 Annual conference of the Society of experimental Mechanics, Orlando, USA, juin .

Carassus H., Morvan H., Haugou G., Guérin J.-D., Sadat T., Guerard S., Markiewicz é. (2021). On the effects of build orientation, strain rate sensitivity and sample thickness on the mechanical behavior of 316l Stainless Steel manufactured by Selective Laser Melting. DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Madrid, janvier .

Bracq A., Bourel B., Delille R., Maréchal C., Haugou G., Lauro F., Roth S., Mauzac O., Bir C. (2020). Numerical recreation of police field cases on a human body FE model : first insights into BABT. PASS2020 Personal Armour System Symposium, Copenhague Danemark, octobre .

Lauro F., Bourel B., Haugou G., Leconte N. (2020). Dynamic failure of crash adhesives in an industrial context. International Conference on Industrial Applications of Adhesives. IAA2020, Funchal (Portugal), mars .

Dorleans V., Delille R., Lauro F., Notta-Cuvier D., Bourel B., Haugou G., Bennani B., Morvan H., Michau E. (2019). A viscoelastic-viscoplastic time temperature equivalence for thermoplastics. 12th European LS-DYNA Conference, Koblenz (Germany), mai .

Bracq A., Delille R., Bourel B., Maréchal C., Haugou G., Lauro F., Mauzac O. (2019). Numerical recreation of field cases on a biofidelic human FE model involving deformable less-lethal projectiles. European Symposium on Non-Lethal Weapons, Brussels (Belgium), mai .

Chtourou R., Chaari F., Haugou G., Leconte N., Markiewicz é., Zouari B. (2018). Experimental study of the mechanical strength and the failure of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions. 12th DYMAT Conference, Arcachon (France), septembre .

Bracq A., Delille R., Bourel B., Maréchal C., Haugou G., Lauro F., Roth S., Mauzac O. (2018). Behind armour blunt trauma assessment by means of experimental and numerical approaches. Personal Armour Systems Symposium, Washington D.C, USA, septembre .

Bracq A., Delille R., Bourel B., Maréchal C., Haugou G., Lauro F., Roth S., Mauzac O. (2018). Risk of rib fractures assessment during kinetic energy projectile impact through experiments and modelling on a human torso FE model. Personal Armour Systems Symposium, Washington D.C, USA, septembre .

Dorleans V., Lauro F., Delille R., Treutenaere S., Notta-Cuvier D., Bennani B., Haugou G., Bourel B., Michau E., Thoby J.-D. (2018). Time temperature equivalence for a mineral filled polymer for automotive applications. 12th International DYMAT Conference, Arcachon (France), septembre .

Nciri M., Notta-Cuvier D., Lauro F., Chaari F., Delille R., Robache F., Haugou G. (2018). Modelling of damageable strain-rate-dependent behaviour of short fibre reinforced thermoplastics. 2nd International Conference on Impact Loading of Structures and Materials (ICILSM), Xi'an (Chine), mai .

Chtourou R., Leconte N., Chaari F., Zouari B., Markiewicz é., Haugou G. (2018). Macroscopic FE modeling of the tensile strength and the failure of asymmetric multi-layer multi-steel grade spot welded assembly. 2nd ICILSM 2nd International Conference on Impact Loading of Structures and Materials, Xi'an (Chine), mai .

Bourel B., Lauro F., Leconte N., Haugou G., Dufour L. (2017). Macroscopic modeling of the adhesive joints behavior and failure under dynamic loadings. 4th International Conference on Structural Adhesive Bonding (AB2017), Porto, Portugal, juillet .

Bracq A., Haugou G., Delille R., Lauro F., Bourel B., Maréchal C., Roth S., Mauzac O. (2017). Characterization of a visco-hyperelastic synthetic gel for ballistic impacts assessment. Society for Experimental Mechanics (SEM), Indianapolis, USA, juin .

Haugou G., Morvan H., Leconte N. (2017). Direct Compression Loading Using the Pre-stretched Bar Technique: Application to High Strains Under Moderate Strain Rates. Society for Experimental Mechanics Annual Conference (SEM 2017), Indianapolis (USA), juin .

Treutenaere S., Lauro F., Bennani B., Haugou G., Xu W., Mottola E., Matsumoto T. (2017). Numerical evaluation of low speed impact behaviour of a fabric layered composite plate in an industrial context. 11th European LS-DYNA Users Conference, Salzburg, Austria, mai .

Chtourou R., Leconte N., Chaari F., Haugou G., Markiewicz é., Zouari B. (2016). Experimental characterisation and macro-modeling of the mechanical behaviour of three-sheet multi-steel grade spot welded assembly. International Conference on Advanced Materials, Mechanics and Manufacturing (A3M2016), Hammamet (Tunisie), décembre .

Hiricoiu A., Haugou G., Guérin J.-D., Coutellier D., Bigerelle M., Naceur H. (2016). Strain rate effects in titanium alloy Ti-6Al-4V obtained by Electron Beam Melting on powder bed. INTERNATIONAL CONFERENCE ON IMPACT OF LIGHTWEIGHT STRUCTURES AND MATERIALS, TORINO, ITALY, mai .

Wouts J., Coutellier D., Oudjene M., Haugou G., Morvan H. (2016). Energy absorption capability of spruce and beech under axial compression with rigid confinement. 1st International Conference on Impact Loading of Structures and Materials, Turin (Italy), janvier .

Lauro F., Balieu R., Bennani B., Haugou G., Bourel B., Chaari F., Matsumoto T., Mottola E. (2015). Damage characterization for particles filled semi-crystalline polymer. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401009].

Dufour L., Bourel B., Lauro F., Haugou G., Leconte N., Carrere N. (2015). Failure stress criterion for adhesively bonded joint at different strain. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401024].

Chtourou R., Haugou G., Leconte N., Zouari B., Chaari F., Markiewicz é. (2015). Experimental characterization and macro-modeling of mechanical strength of multi-sheets and multi-materials spot welds under pure and mixed modes I and II. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401032].

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2015). Dynamic behavior and failure of the base and heat affected materials of a HSS fillet welded joint. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401032].

Haugou G., Leconte N., Morvan H. (2015). Separation of the elastic waves' system in pre-stretched bar devices. DYMAT, Lugano, Switzerland, septembre . [DOI=10.1051/epjconf/20159401032].

Dufour L., Bourel B., Lauro F., Haugou G., Leconte N., Carrere N. (2015). A new arcan test device for dynamic loadings of adhesively bonded joints. 3rd International Conference on Structural Adhesive Bonding, Porto, Portugal, juillet .

Wouts J., Houillon M., Haugou G., Oudjene M., Coutellier D., Naceur H., Rahmoun J. (2015). On the mechanical characterization of Pine and Beech material parameters under impact loading. 18th International Conference on Composite structures, Lisbon, Portugal, juin .

Lauro F., Balieu R., Bennani B., Haugou G., Matsumoto T., Mottola E. (2014). Experimental behaviour, damage and failure of a filled semi-crystalline polymer on a large strain rate range. ICEM16, 16th International Conference on Experimental Mechanics, Cambridge, England, juillet .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é. (2013). Dynamic behavior of aluminum honeycombs under mixed compression/shear loadings and effects of cells in-plane orientations. IUTAM Symposium on Recent Development of Experimental Techniques Under Impact Loading, Xi'an, China, mai .

Mayeur O., Haugou G., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Development of New Hopkinson's Device Dedicated to Rib's Bone Characterisation. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Mayeur O., Haugou G., Chaari F., Delille R., Drazetic P., Markiewicz é. (2012). Strain Rate and Anisotropy Effects on Mechanical Behaviour of Cortical Bone. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2012). Experimental study of aluminium honeycomb behavior under dynamic multiaxial loading: effects of the in-plane orientation. 10th International DYMAT Conference, Freiburg, Germany, septembre .

Haugou G., Bourel B., Lauro F., Bennani B., Lesueur D., Morin D. (2012). Characterization and modelling of structural bonding at high strain rate. 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, DYMAT, Freibourg, Allemagne, septembre ., ISBN 978-2-7598-0757-4

Tounsi R., Chaari F., Zouari B., Dammak F., Haugou G., Markiewicz é. (2011). Quasi-static and dynamic behavior of aluminum honeycomb under multiaxial load: numerical experiments. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Haugou G., Bourel B., Brefort R., Lauro F. (2011). Characterization of structural adhesive for high strain rate. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Mayeur O., Markiewicz é., Drazetic P., Haugou G., Chaari F. (2011). Quasi-static and dynamic behaviour of the bone structures with fine geometric and materials modelling aspects. 3rd International Conference on Impact Loading of Lightweight Structures (ICILLS'2011), Valenciennes, France, juin .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2011). Dynamic behaviour of aluminium honeycomb undermultiaxial load: numerical experiments. 3th International Conference on Impact Loading of Lightweight Structures, Valenciennes, France, juin .

Lauro F., Morin D., Bourel B., Bennani B., Haugou G. (2011). A New Cohesive Element for Structural Bonding Modeling in Crash Applications. 34th Annual Meeting of The Adhesion Society, Savannah, USA, février .

Maréchal C., Bresson F., Haugou G. (2010). Numerical tools for the impact parameters identification of the 9mm parabellum FMJ bullet. 7th International Symposium on Impact Engineering (ISIE2010), Varsovie, Pologne, juillet .

Morin D., Haugou G., Bennani B., Lauro F. (2010). Characterization of a structural adhesive by Digital Image Correlation. Proceedings of the SEM Annual Conference, Society for Experimental Mechanics Inc., Indianapolis, USA, juin ., ISBN 978-1-935116-05-9

Morin D., Haugou G., Lauro F., Bennani B. (2010). Elasto-viscoplasticity Behavior of a Structural Adhesive Under Compression Loadings. Proceedings of the SEM Annual Conference & Exposition on Experimental and Applied Mechanics "Experimental Mechanics of High Performance Systems", Society for Experimental Mechanics Inc., Indianapolis, USA, juin ., ISBN 978-1-935116-05-9

Morin D., Haugou G., Bennani B., Lauro F. (2010). Identification of new behaviour and failure models for toughened epoxy adhesive. 33rd Annual meeting of adhesion society, Daytona Beach, USA, février ., ISBN 1086-9506

Haugou G., Markiewicz é., Halgrin J. (2009). Material responses of cortical bovine bone under compression loading using a pre-stressed Hopkinson bars set. 9th International Conference on mechanical and physical behaviour of material under dynamic loading, DYMAT, Bruxelles, Belgique, septembre .

Lauro F., Morin D., Haugou G., Bennani B. (2009). Application of SEE method on multiphase steel. SEM Annual Conference, Albuquerque, Nouveau Mexique, USA, juin .

Haugou G., Halgrin J., Markiewicz é. (2008). Proposition of adaptative set-up for compressive loading using a pre-stressed Hopkinson bars device - Application to material responses of cortical bovine bone. International Conference - Impact Loading of Lightweight Structures, Trondheim, Norway, juin .

Haugou G., Markiewicz é., Fabis J. (2006). No-direct tensile loading of sheet specimens on a classical split Hopkinson bars apparatus. 8th International Conference on mechanical and physical behaviour of material under dynamic loading, DYMAT, Dijon, France, janvier .

Haugou G., Markiewicz é., Fabis J. (2004). No-direct tensile testing on split Hopkinson bars apparatus : assessment of an original configuration by means of 4-coupon specimens. Crashworthiness of light-weight automotive structures, International Symposium 2004, Trondheim, Norway, juin .

Haugou G., Fabis J., Markiewicz é., Gary G. (2003). Partial overlapping domain for material laws behaviour on metallic sheet specimens at a moderate strain rates range. TILT / ICD 2003, Lille, France, décembre .

Haugou G., Fabis J., Langrand B., Deletombe é., Markiewicz é. (2002). Iterative experimental/numerical procedure for improvement of dynamic experimental facilities. Structure Under Shock and Impact VII (SUSI2002), Montreal, Canada, janvier .

Haugou G., Langrand B., Fabis J. (2001). Recherche d'une méthode originale pour l'identification des modes propres d'un montage dynamique. XVème Congrès Français de Mécanique, Nancy, France, janvier .

Leconte N., Chaari F., Haugou G., Markiewicz é. (2023). Construction d'un critère de rupture prenant en compte la qualité des points soudés par résistance. Les Assemblages mécaniques - Evolutions récentes et perspectives (5ème Colloque Assemblages), Saint-Ouen, France, juillet .

Bourel B., Lauro F., Haugou G., Leconte N. (2023). Modelling of adhesive failure for crash. Les Assemblages mécaniques - Evolutions récentes et perspectives (5ème Colloque Assemblages), Saint-Ouen, France, juillet .

Carassus H., Guérin J.-D., Morvan H., Haugou G., Markiewicz é., Guerard S. (2021). Conception et caractérisation d'un absorbeur d'énergie obtenu par fabrication additive. 17ème colloque national S-mart AIP-PRIMECA, France, mars .

Chtourou R., Chaari F., Haugou G., Leconte N., Markiewicz é., Zouari B. (2017). Experimental characterisation of multi-sheet, multi-material spot-welded assemblies under pure and combined loading conditions. CFM2017, Lille (France), août .

Hiricoiu A., Haugou G., Coutellier D., Naceur H. (2017). Comparaison du comportement dynamique de deux titanes Ti-6Al-4V produits par fabrication additive. In AIP-PRIMECA (Eds.) Colloque sur la Conception Mécanique Intégrée, La Plagne, avril .

Bourel B., Lauro F., Leconte N., Haugou G., Dufour L. (2017). Bonded assemblies modelling under crash loading. Société des Ingénieurs de l'Automobile, Multimatériaux pour l'allègement, Saint Quentin en Yvelines, mars .

Notta-Cuvier D., Nciri M., Lauro F., Chaari F., Delille R., Robache F., Haugou G., Maalej Y., Zouari B. (2016). Variabilité des propriétés constitutives, géométriques et mécaniques des fibres végétales : quel impact sur le comportement mécanique de composites à fibres courtes ?. 2ème édition des Journées Jeunes Chercheurs Eco-composites et Composites Bio-sourcés, IFMA/SIGMA, Clermont-Ferrand (France), avril .

Notta-Cuvier D., Nciri M., Lauro F., Chaari F., Delille R., Robache F., Haugou G., Maalej Y., Zouari B. (2016). Comportement sous sollicitations dynamiques de thermoplastiques renforcés par fibres courtes: Influence couplée de la vitesse de déformation et des distributions d'orientation des fibres. Journées du Groupe de Travail MécaDymat, Icube, Illkirch (France), mars .

Carrier J., Markiewicz é., Haugou G., Lebaillif D., Leconte N., Naceur H. (2015). Thermal effect of the welding process on the dynamic behavior of the HSS constitutive materials of a fillet welded joint. CFM2015, Lyon, France, août .

Hiricoiu A., Haugou G., Guérin J.-D., Coutellier D., Bigerelle M., Naceur H. (2015). Caractérisation en dynamique rapide du Ti-6Al-4V obtenu en Fabrication Additive par Faisceau d'Électrons. CFM, Lyon, août .

Bourel B., Haugou G., Lauro F., Deltombe R., Lesueur D., Bennani B. (2013). Modélisation et caractérisation des joints collés à hautes vitesses de déformation. J. Chroné, J.-D Guérin et P. Quaegebeur, MATEC Web of Conferences Proceedings - Journées Annuelles SF2M 2013, 7, edp sciences, Lille, pp. 02014, octobre ., ISBN 978-2-7598-1080-2 [DOI=10.1051/matecconf/20130702014].

Markiewicz é., Tounsi R., Zouari B., Chaari F., Haugou G. (2013). Comportement dynamique des NIDA Al sous chargements mixtes Compression/Cisaillement et effets de l'angle d'orientation des cellules. Journées MECADYMAT 2013, Brest, avril .

Haugou G., Markiewicz é. (2009). Essais de compression dynamique par barres de Hopkinson pré-tendues, Material responses of cortical bovine bone under compression loading using a pre-stressed Hopkinson bars. MécaDymat09, Bourges, France, avril .

Halgrin J., Haugou G., Rota L., Markiewicz é. (2006). Modèles de crash dédiés phase d'avant-projet : Application sur un bloc-avant automobile. Colloque « Sécurité dans le Transport », Bordeaux, France, janvier .

Tounsi R., Zouari B., Chaari F., Haugou G., Markiewicz é., Dammak F. (2012). Impact behavior of honeycombs under dynamic multiaxial loading. 2nd DYMAT Student Camp, Tampere, Finland, juin .

Mayeur O., Haugou G., Chaari F., Drazetic P., Markiewicz é. (2012). Improvement of the strain-stress relationships of the cortical bone using refined geometrical data. 2nd DYMAT Student Camp, Tampere, Finland, juin .

Haugou G., Markiewicz é., Halgrin J. (2009). Material responses of cortical bovine bone under compression loading using a pre-stressed Hopkinson bars set. International Workshop in Memory of Prof. J.R. Klepaczko – Dynamic Behaviour of Materials, Metz, France, mai .

Haugou G., Fabis J., Langrand B., Deletombe é. (2001). Mise en œuvre d'une méthode originale pour l'identification des modes propres et la conception d'un montage d'essais dynamiques. International Conference on Multidisciplinary Design in Engineering CSME-MDE, Montreal, Canada, janvier .

Leconte N., Chtourou R., Nguyen T., Markiewicz é., Chaari F., Haugou G. (2016). Modélisation macroscopique d'un assemblage soudé 3 tôles multi-matériaux. Rapport projet ANR ASAP, LAMIH, Valenciennes, janvier .

Balieu R., Lauro F., Bennani B., Bourel B., Haugou G. (2010). Polymer behaviour and fracture modelling for crashworthiness (TOYOTA). , LAMIH, Valenciennes, septembre .

Bourel B., Morin D., Lauro F., Bennani B., Haugou G. (2010). Modélisation des assemblages collés par éléments cohésifs. Rapport de contrat L&L products, LAMIH, Valenciennes, septembre .

Balieu R., Lauro F., Bennani B., Bourel B., Haugou G. (2010). Numerical implementation and experimental results (TOYOTA). , LAMIH, Valenciennes, juin .

Balieu R., Lauro F., Bennani B., Bourel B., Haugou G. (2010). Damage and failure models for polymers (TOYOTA). , LAMIH, Valenciennes, février .

Tison T., Haugou G., Lallemand B., Markiewicz é. (2007). Calibrabilité des systèmes de déclenchement de retenue passagers en configurations de chocs frontal et latéral. Contrat de recherche Autoliv, LAMIH, Valenciennes, novembre .

Bennani B., Cornette D., Croix P., Deletombe é., Fabis J., Haugou G., Lauro F., Markiewicz é. (2005). Rupture en pleine tôle de l'acier THR800 sous sollicitations dynamiques à moyennes vitesses de déformation (ARCELOR). , LAMIH, Valenciennes, juillet .

Markiewicz é., Bennani B., Lauro F., Croix P., Haugou G. (2004). Campagne d'essais sur aciers à très hautes résistances - Etude du comportement à l'endommagement d'éprouvette plates entaillées. Rapport ARCELOR, lamih, valenciennes, janvier .

Bennani B., Cornette D., Croix P., Deletombe é., Fabis J., Haugou G., Lauro F., Markiewicz é. (2004). Rupture en pleine tôle de l'acier THR800 sous sollicitations dynamiques à moyennes vitesses de déformation. Rapport ARCELOR, lamih, valenciennes, janvier .

Haugou G., Markiewicz é., Drazetic P. (1999). Expérimentation et simulation umérique du rivetage ferroviaire. Rapport de recherche ALSTOM, Université, LAMIH, Valenciennes, janvier .

Haugou G. (2003). Moyens d'essais et de caractérisation de lois de comportement matérielles en dynamique moyennes vitesses. , Université de Valenciennes et du Hainaut Cambrésis, valenciennes, décembre .